Prestige Moto Category

Own the night with confidence. The NiteRider® BlueBomb™ is built for riders who demand visibility, safety, and versatility when the sun goes down. Featuring a powerful 100-lumen blue rear light, the BlueBomb™ is designed to help you stand out in low-light conditions, whether you're riding trails, racing, or navigating backroads after dark.

Paired with NiteRider’s patented Pivot stick-on mount and taillight adapter, this setup easily secures to helmets and other smooth surfaces for maximum flexibility. The strong adhesive mount keeps your light locked in place through rugged rides, while the quick-twist design allows you to remove the light in seconds.

From nighttime trail rides to high-speed powersports racing adventures, the BlueBomb™ helps keep you visible so you can focus on the ride ahead.

Helmet not included.

For off-road use only.

BlueBomb CherryBomb™ 100 Taillight is a safety light that meets the safety requirements for SCORE International for all motorcycle and ATV classes.

FEATURES
• 4 Modes with a Run Time up to 136h
• Weight: 82g
• Battery: 2 x AAA Alkaline
• Highly Visible Blue Light up to 1 Mile
• Dust-tight and Heavy Rain Proof IP66 Rated
• Includes BlueBomb™ 100 Taillight, Pivot Stick-on Mount with 3M Adhesive, and 2xAAA Batteries

RUN TIME*
Fast Flash - 96:00h
Pulse Flash - 136:00h
Steady High - 72:00h
Steady Low - 127:00h

*Run time specifications may vary

US PATENT NO. 10,267,498

Ideal for Off Road applications, the Pro 4200 MX Enduro Helmet Headlamp is equipped with 6 high quality LEDs and comes with Jawbone MX Mount for Pro Series.

NiteRider's Patented mount attaches securely to full face helmets allowing you to see that trench, maintain your corner speed, rip through that corner, and flow through your line! Increase your visibility and enhance your riding experience by seeing farther and wider, delivering light to areas that your headlights don’t.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 4200
Run Time: 1:30 – 21:00hrs
Charge Time: 3:00 / 6:00hrs
Battery: 8-cell Li-Ion Battery with USB output capability

WEIGHT
Head light + Jawbone MX Mount = 344 Grams
8 Cell Battery 593 Grams

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 2000 Lumens
High - 1:30h at 4200 Lumens
Flash - 15:00h at 1400 Lumens
Pulse - 11:00h at 1400 Lumens
S.O.S. - 21:0h at 1400 Lumens
Race - 16:30h at 600 Lumens

*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses a total of 6 LEDs, the highest performing LEDs on the market
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Durable Lens – high quality glass lens
• 8 Cell Li-Ion Battery Pack with USB output to charge other USB devices
• Utilizes NiteRider’s Patented* Jawbone MX Mount for Pro Series
• Hand assembled in our San Diego, CA facility

*US Patent No. 9572388 Jawbone Helmet Mount

SYSTEM INCLUDES
• Pro 4200 MX Enduro Headlamp (Helmet not included)
• 8-cell Li-Ion Battery with USB output capability
• Jawbone MX Mount for Pro Series
• 36” Extension Cable
• AC Adapter AND MX Hardwire Kit
• Nylon Storage Pouch

Designed for long rides and demanding terrain, the Pro 2200 MX Enduro delivers up to 2200 lumens of powerful, trail-specific lighting with extended run times from its high-capacity 8-cell Li-Ion battery. Three high-performance LEDs and custom off-road reflectors provide a wide, far-reaching beam so you can see deeper into corners and ride with confidence in low-light conditions.

Using NiteRider's Patented Jawbone MX Mount; It securely attaches to full-face helmets, keeping the light stable and aimed exactly where you look. Rugged, impact-tested, and IP66 rated, the Pro 2200 MX Enduro is built to perform when the ride goes long and the trail gets dark.

SPECIFICATIONS BY FL1 STANDARDS

Lumen Output: 2200
Run Time: 3:00 – 50:00hrs
Charge Time: 5:00hrs
Battery: 8 Cell Li-Ion
1 Meter Impact Test: Pass/OK

WEIGHT
Head light + JawBone mount = 228 Grams
8 Cell Battery 593 Grams

RUN TIMES*
Low - 12:00h at 500 Lumens
Medium - 6:00h at 800 Lumens
High - 3:00h at 2200 Lumens
Flash - 50:00h at 730 Lumens
Beacon - 50:00h at 730 Lumens
S.O.S. - 50:00h at 730 Lumens 
Race - 50:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 8 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Utilizes NiteRider’s Patented* JawBone Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

*US Patent No. 9572388 Jawbone Helmet Mount

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 8 Cell Li-Ion Battery
• JawBone Helmet Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

The Pro 2200 MX Race Helmet Headlamp features three high-quality LEDs and includes the Pro Series Jawbone MX Mount for a secure, race-ready fit.

NiteRider’s Patented mounting system locks firmly onto full-face helmets, putting powerful light exactly where you look, so you can spot that trench, hold your corner speed, and flow through every line with confidence. By delivering light farther and wider than bar-mounted headlights alone, the Pro 2200 MX boosts visibility and control when it matters most.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 2200
Run Time: 1:30 – 25:00hrs
Charge Time: 5:00hrs
Battery: 4 Cell Li-Ion | 7.4 Volts | 5200 mAh | 38.48 Wh
1 Meter Impact Test: Pass/OK

WEIGHT
Head light + Jawbone mount = 228 Grams
4 Cell Battery 326 Grams

RUN TIMES*
Low - 6:00h at 500 Lumens
Medium - 3:00h at 800 Lumens
High - 1:30h at 2200 Lumens
Flash - 25:00h at 730 Lumens
Beacon - 25:00h at 730 Lumens
S.O.S. - 25:00h at 730 Lumens 
Race - 25:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 4 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Utilizes NiteRider’s Patented* Jawbone MX Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

*US Patent No. 9572388 Jawbone Helmet Mount

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 4 Cell Li-Ion Battery
• Jawbone MX Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

Built for riders who demand uncompromising brightness and unlimited run time, the Pro 4200 MX Hardwire Helmet Headlamp with Jawbone Mount delivers a massive 4200 lumens through six high-performance LEDs. Similar in design to the Enduro model but engineered for maximum output, this system hardwires directly to your vehicle’s battery, eliminating runtime limits and keeping your light at full strength for as long as the ride lasts.

Using NiteRider’s Patented Jawbone Mount, the Pro 4200 MX attaches securely to full-face helmets, placing powerful, trail-optimized light exactly where you’re looking. Dual custom reflectors project a wide, far-reaching beam that fills in dark corners and illuminates terrain your vehicle headlights can’t reach, giving you greater confidence at speed and in technical sections.

Rugged, IP66-rated, and hand-assembled in San Diego, California, the Pro 4200 MX is built to withstand harsh off-road conditions while delivering relentless performance for night riding, racing, and endurance missions.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 4200
Vehicle Power Source
IP66 Water and dust resistant

WEIGHT
Head light + Jawbone mount = 314 Grams

7 MODES
Low at 1000 Lumens
Medium at 2000 Lumens
High at 4200 Lumens
Flash at 1400 Lumens
Beacon at 1400 Lumens
S.O.S. at 1400 Lumens
Race at 600 Lumens

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses a total of 6 LEDs, the highest performing LEDs on the market
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Durable Lens – high quality glass lens
• Optional 8 Cell Li-Ion Battery Pack with USB output to charge other USB devices
• Utilizes NiteRider’s Patented* Jawbone MX Mount for Pro Series
• Hand assembled in our San Diego, CA facility

*US Patent No. 9572388 Jawbone Helmet Mount

SYSTEM INCLUDES
• Pro 4200 MX Headlamp
• MX Hardwire Kit
• Jawbone MX Mount for Pro Series
• 36″ Extension Cable

Ride farther and stay visible with the NiteRider® Blue Omega™ 330. Featuring a powerful 330-lumen blue rear light output, this taillight is designed to help riders stand out on trails, tracks, and off-road rides day or night.

With six lighting modes, up to 36.5 hours of runtime, and an IP66 heavy water and dust-resistant design, the Omega™ Blue is built for rugged conditions. Lightweight and easy to mount with the included patented Pivot Stick-on Mount, it also features fast Micro USB recharging, no disposable batteries required.

Its compact, versatile design makes it easy to attach to bikes, gear, or packs for added visibility wherever you ride. Whether you're racing, exploring trails, or riding after dark, the Omega™ Blue helps increase rear visibility so you can ride with confidence.

Helmet not included.

For off-road use only.

Omega™ Blue 330 Taillight is a safety light that meets the safety requirements for SCORE International for all motorcycle and ATV classes.

FEATURES
• Lumen Output: 330
• 6 Modes with Run Times: 6:00-36:30h
• Charge Time: 2:15h
• Weight: 79g
• Dust-tight and Heavy Rain Proof IP66 Rated
• Micro USB Rechargeable
• Includes Blue Omega™ 330 Taillight, Pivot Stick-on Mount with 3M Adhesive, and Micro USB Charging Cable

RUN TIMES*
Max Flash - 6:00h
Fast Flash - 17:30h
Disco Flash - 9:30h
Pulse Flash - 6:30h
High Steady - 7:00h
Low Steady - 36:30h

*Run time specifications may vary

US PATENT NO. 10,267,498

Set of two Pro ADV 4200 headlamps, for combined output of 8400 lumens!
The Pro ADV 4200 Set is equipped with 12 high quality LEDs and comes with a Remote Switch that mounts to your handlebar for easy operation. Increase your visibility and enhance your Adventure motorcycle riding experience by seeing farther and wider, delivering light to areas that your headlights don’t. Our build quality and durability is top notch, allowing for long lasting operation so you can keep the ride going!

A wide array of vehicle applications, the Pro 4200 ADV Set is compatible with almost all Motorcycles, ATVs, etc. Ideal for Off Road and Adventure Motorcycle applications!

Set of two Pro ADV 2200 headlamps, outputting 4200 lumens combined!
The Pro ADV 2200 Set is equipped with 6 LEDs and comes with a Remote Switch that mounts to your handlebar for easy operation. Increase your visibility and enhance your Adventure motorcycle riding experience by seeing farther and wider, delivering light to areas that your headlights don’t. Our build quality and durability is top notch, allowing for long lasting operation so you can keep the ride going!

A wide array of vehicle applications, the Pro 2200 ADV Set is compatible with almost all Motorcycles, ATVs, etc. Ideal for Off Road and Adventure Motorcycle applications!

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 4400 Lumens Combined
Vehicle Power Source
Wattage Draw: 56 Watts
IP66 Water and dust resistant
1 Meter Drop Test: Pass/OK

FEATURES
• 3 Modes – low, high, daytime running (safety flash)
• Uses LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Borofloat® Lens – high quality glass lens
• Lighting system is hardwired to deliver long lasting operation
• Handlebar mounted Remote Switch for easy thumb operation
• Multiple light mode levels
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

SYSTEM INCLUDES
• (2) Pro ADV 2200 Headlamps
• Hardwire harness kit with Remote Switch
• Mounting clamps with mounting hardware

Built for high-intensity riding and race-day performance, the Pro 2200 MX Race Helmet Mounting Light with Stick-On Mount delivers up to 2200 lumens of powerful, focused illumination in a lighter, more compact setup. Powered by a 4-cell Li-Ion battery, it provides strong output and efficient run times ideal for motos, short endurance rides, and aggressive off-road conditions.

Three high-performance LEDs paired with precision-engineered off-road reflectors produce a wide, controlled beam that enhances depth perception and corner visibility, helping riders stay fast and confident in low-light environments.

The light mounts using a low-profile, high-strength stick-on helmet mount designed to withstand vibration, impact, and rough terrain. The durable adhesive creates a secure bond to full-face helmets while maintaining a sleek, aerodynamic profile with minimal added bulk. Optional positioning allows riders to place the light exactly where it best complements their helmet and riding style.

Lightweight, rugged, and IP66-rated for water and dust resistance, the Pro 2200 MX Race Helmet Mounting Light is purpose-built for riders who demand reliable visibility without added weight, when every lap and every second counts.

Helmet not included.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 2200
Run Time: 1:30 – 25:00hrs
Charge Time: 5:00hrs
Battery: 4 Cell Li-Ion | 7.4 Volts | 5200 mAh | 38.48 Wh
1 Meter Impact Test: Pass/OK

WEIGHT
Head light + Stick On mount = 198 Grams
4 Cell Battery 326 Grams

RUN TIMES*
Low - 6:00h at 500 Lumens
Medium - 3:00h at 800 Lumens
High - 1:30h at 2200 Lumens
Flash - 25:00h at 730 Lumens
Beacon - 25:00h at 730 Lumens
S.O.S. - 25:00h at 730 Lumens 
Race - 25:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 4 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Utilizes NiteRider’s Patented* Stick On Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

*US Patent No. 10,267,498 Pivot Mount

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 4 Cell Li-Ion Battery
• Stick On Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

Increase your visiblity and enhance your riding experience by seeing farther and wider, delivering light to areas that your headlights don’t. The Pro 2200 MX Hardwire uses NiteRider’s unique Jawbone MX Mount for Pro Series, shine light to where you want by turning your head direction.

The light was designed to be hardwired to your vehicle power source for long lasting operation so you can keep the ride going! Ideal for Off Road conditions.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 2200
IP66 Water and Dust Resistant
1 Meter Impact Test: Pass/OK

WEIGHT
Head light + Jawbone mount = 221 Grams

7 MODES
Low - 500 Lumens
Med - 800 Lumens
High - 2200 Lumens
Walk - 250 Lumens
3 Flash Modes, including S.O.S. - 25:00h

FEATURES
• Uses 3 LEDs, the highest performing LEDs on the market
• Highly durable design, specifically for off road conditions
• Custom 3 Cone Reflector – delivering a beam pattern designed specifically for off-road
• Lighting system is design to be hardwired to deliver long lasting operation
• Utilizes NiteRider’s Patented* Jawbone MX Mount for Pro Series
• Lightweight, head light + mount = only 221 grams
• Multiple light mode levels
• Hand assembled in our San Diego, CA facility

*US Patent No. 9572388 Jawbone Helmet Mount

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• MX Jawbone Mount
• 36” Extension Cable
• Hardwire Harness
• Nylon Storage Pouch

Designed for long rides and demanding terrain, the Pro 2200 MX Enduro Helmet Mounted Light with Stick On Mount delivers up to 2200 lumens of powerful, trail-specific lighting with extended run times from its high-capacity 8-cell Li-Ion battery. Three high-performance LEDs combined with custom off-road reflectors create a wide, far-reaching beam, letting you see deeper into corners and ride confidently through low-light and night conditions.

The light mounts using a low-profile, heavy-duty stick-on helmet mount engineered to stay secure in aggressive riding environments. The high-strength adhesive forms a solid bond to full-face helmets, resisting vibration, impact, and rough terrain while maintaining a clean, streamlined look. Its compact design minimizes wind drag and helmet bulk, making it comfortable for extended rides.

For added versatility, the stick-on mount giving riders the freedom to place the light exactly where it works best for their setup and riding style. Rugged, impact-tested, and IP66-rated or water and dust resistance, the Pro 2200 MX Enduro is built to perform when the ride goes long and the trail gets dark.

SPECIFICATIONS BY FL1 STANDARDS

Lumen Output: 2200
Run Time: 3:00 – 50:00hrs
Charge Time: 5:00hrs
Battery: 8 Cell Li-Ion
1 Meter Impact Test: Pass/OK

WEIGHT
Head light + Stick On mount = 198 Grams
8 Cell Battery 593 Grams

RUN TIMES*
Low - 12:00h at 500 Lumens
Medium - 6:00h at 800 Lumens
High - 3:00h at 2200 Lumens
Flash - 50:00h at 730 Lumens
Beacon - 50:00h at 730 Lumens
S.O.S. - 50:00h at 730 Lumens 
Race - 50:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 8 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Utilizes NiteRider’s Patented* Stick On Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

*US Patent No. 10,267,498 Pivot Mount

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 8 Cell Li-Ion Battery
• Stick On Helmet Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

Lumina™ Micro-Moto 950 with Lumina Stick On Mount

Note: The NiteRider® Lumina™ Micro 950 is shipped from the factory in Travel Lock Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

Small enough to disappear on your helmet, bright enough to lead the pack. The Micro 950 is the ultimate "just-in-case" light for every gear bag. Whether you’re navigating the pits, scouting the perimeter of the campground, or need a reliable backup for your bike’s headlight, the Micro delivers 950 lumens of crystal-clear visibility in a featherweight package.
Helmet not included.

FEATURES
• Lumen Output: 950
• 5 Modes with Run Times: 2:00 – 41:00hrs
• Charge Time: 2:30 / 4:30hrs
• Weight: 140g
• Battery: Li-Ion | 3.7 Volts | 1800 mAh | 6.66 Wh
• Low Battery Indicator
• USB-C Rechargeable
• Compact and Lightweight 
• Water / Dust Resistant IP66 Rated

RUN TIMES*
Low - 13:00h at 200 Lumens
Med - 5:00h at 425 Lumens
High - 2:00h at 950 Lumens
Flash - 14:00h at 950 Lumens
Walk - 41:00h at 50 Lumens 
 *Run times are approximations and may vary 
 

Ideal for Off Road applications, the Pro 4200 MX Enduro Helmet Headlamp is equipped with 6 high quality LEDs and comes with an MX Stick On Mount for Pro Series.

NiteRider's Patented mount attaches securely to full face helmets allowing you to see that trench, maintain your corner speed, rip through that corner, and flow through your line! Increase your visibility and enhance your riding experience by seeing farther and wider, delivering light to areas that your headlights don’t.



SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 4200
Run Time: 1:30 – 21:00hrs
Charge Time: 3:00 / 6:00hrs
Battery: 8-cell Li-Ion Battery with USB output capability
WEIGHT
8 Cell Battery 593 Grams

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 2000 Lumens
High - 1:30h at 4200 Lumens
Flash - 15:00h at 1400 Lumens
Pulse - 11:00h at 1400 Lumens
S.O.S. - 21:0h at 1400 Lumens
Race - 16:30h at 600 Lumens
*Run times are approximations and may vary

FEATURES
• IP66 Rating – Dust-proof and water resistant
• Uses a total of 6 LEDs, the highest performing LEDs on the market
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Durable Lens – high quality glass lens
• 8 Cell Li-Ion Battery Pack with USB output to charge other USB devices
• Utilizes NiteRider’s Patented* MX Stick On Mount for Pro Series
• Hand assembled in our San Diego, CA facility
*US PATENT NO. 10,267,498 Pivot Mount

SYSTEM INCLUDES
• Pro 4200 MX Enduro Headlamp (Helmet not included)
• 8-cell Li-Ion Battery with USB output capability
• MX Stick On Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

Lumina™ Pro-Moto 1550 with Lumina Stick On Mount & NiteLink Wireless

Note: The NiteRider® Lumina™ Pro 1550 is shipped from the factory in Travel Lock Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock. 

Take total control of your lighting without ever moving your hand from the grip. The Pro-Moto 1550 features integrated NiteLink™ Wireless technology, allowing you to sync your helmet light to a NiteLink™ handlebar remote (sold separately). Toggle through 1550 lumens of high-definition light on the fly, keeping your focus on the terrain and your fingers on the clutch.  
Helmet not included.

 
FEATURES
• Lumen Output: 1550
• 8 Modes with Run Times: 0:45-17:00h
• Charge Time: 4:00h
• Weight: 173 grams
• Battery: Li-Ion | 3.7 Volts | 3000 mAh | 11.10 Wh
• Water / Dust Resistant IP66 Rated
• 8-Step Fuel Gauge
• Dual Button Power Switch, Brighter (+)/ Dimmer (-)
• USB-C Rechargeable
• Travel Lock Mode - perfect for use during storage and transporting the light.
Press and hold power button for 8-10 seconds to lock out operation of light. 

RUN TIMES*
Low - 6:00h at 250 Lumens
Med - 3:00h at 650 Lumens
High - 1:30h at 1000 Lumens
Boost - 0:45h at 1550 Lumens
Super Flash - 7:30h
Pulse Flash - 12:00h
Fast Flash - 8:00h
Walk Mode - 17:00h at 85 Lumens
*Run times are approximations and may vary

Warning Hot Surfaces!
 
Do not use the Lumina™ as a hand-held lighting device when in high and boost modes! 

Lumina™ Pro-Moto 1400 with Lumina Stick On Mount 

Note: The NiteRider® Lumina™ Pro 1400 is shipped from the factory in Travel Lock Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock

The ultimate workhorse balancing the best combination of high-powered output in a convenient lightweight package. The Pro-Moto 1400 offers a consistent and balanced beam which tracks perfectly with your line of sight and is essential for spotting roots, ruts, and rocks. With ruggedized, vibration-resistant housing, this light is designed to endure the G-forces of hard landings and the grit of the trail.
Helmet not included.

FEATURES
• Lumen Output: 1400
• 8 Modes with Run Times: 0:55-20:00h
• Charge Time: 4:00h
• Weight: 172 grams
• Battery: Li-Ion | 3.7 Volts | 3000 mAh | 11.10 Wh
• Water / Dust Resistant IP66 Rated
• Dual Button Power Switch, Brighter (+)/ Dimmer (-)
• USB-C Rechargeable
• Includes: Lumina™ Pro 1400 front light, stick on mount and USB-C charging cable 

RUN TIMES*
Low - 7:00h at 250 Lumens
Med - 3:00h at 500 Lumens
High - 1:30h at 950 Lumens
Boost - 0:55h at 1400 Lumens
Super Flash - 16:00h at 950 Lumens
Pulse Flash - 15:00h at 950 Lumens
Fast Flash - 12:00h at 950 Lumens
Walk Mode - 20:00h at 75 Lumens
*Run times are approximations and may vary

Warning Hot Surfaces! 
Do not use the Lumina™ as a hand-held lighting device when in high and boost modes! 

Lumina™ Dual-Moto 2000 with Lumina Stick On Mount  

Note: The NiteRider® Lumina™ Dual 2000 is shipped from the factory in Travel Lock Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock. 

When the sun drops, the throttle stays pinned. The Dual-Moto 2000 is our most powerful self-contained helmet light, engineered to handle the high-speed demands of desert racing and wide-open fire roads. Featuring a specialized dual-beam pattern, it throws a piercing spotlight deep into the distance while flooding your peripheral vision to eliminate "tunnel vision." No wires, no external battery packs—just 2000 lumens of raw, trail-taming power. 
Helmet not included.

FEATURES
 

• Lumen Output: 2000
• 7 Modes with Run Times: 1:00-21:30hrs
• Charge Time: 3:30 hrs
• Weight: 237g
• Battery: Li-Ion | 3.7 Volts | 6000 mAh | 22.2 Wh
• Low Battery Indicator
• USB-C Rechargeable
• Boost Mode for Maximum LED Output
• Boost Mode indicator, power button will light up red and blue
• Water / Dust Resistant IP66 Rated 

RUN TIMES*
Low - 8:30h at 575 Lumens
Med - 4:30h at 950 Lumens
High - 2:30h at 1800 Lumens
Boost - 1:00h at 2000 Lumens
Pulse Flash - 9:45h at 1800 Lumens
Fast Flash - 17:30h at 1900 Lumens
Walk - 21:30h at 150 Lumens 
*Run times are approximations and may vary 

Warning Hot Surfaces! 
Do not use the Lumina™ as a hand-held lighting device when in high and boost modes! 

Lumina™ Boost-Moto 1250 with Lumina Stick On Mount 

Note: The NiteRider® Lumina™ 1250 Boost is shipped from the factory in Travel Lock Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

Keep your helmet setup low-profile without sacrificing the output needed for technical sections. The Boost-Moto 1250 features a specialized "Boost Mode" that lets you jump to maximum output when the trail tightens up or the pace quickens. It’s the perfect balance of weight and wattage for riders who want to feel agile in the cockpit while maintaining total visibility.
Helmet not included.

FEATURES
• Lumen Output: 1250
• 7 Modes with Run Times: 1:00-21:00hrs
• Charge Time: 2:30 / 5:00 hrs
• Weight: 174g
• Battery: Li-Ion | 3.7 Volts | 2600 mAh | 9.62 Wh
• Low Battery Indicator
• USB-C Rechargeable
• Boost Mode for Maximum LED Output
• Boost Mode indicator, power button will light up red and blue
• Water / Dust Resistant IP66 Rated

RUN TIMES*
Low - 6:00h at 250 Lumens
Med - 3:30h at 380 Lumens
High - 1:30h at 850 Lumens
Boost - 1:00h at 1250 Lumens
Pulse Flash - 10:30h at 850 Lumens
Fast Flash - 6:00h at 850 Lumens
Walk - 21:00h at 65 Lumens 
*Run times are approximations and may vary

Warning Hot Surfaces! 
Do not use the Lumina™ as a hand-held lighting device when in high and boost modes!