Swift™ 300 and Vmax+™ 150 Combo Front and Rear Light Set
495 in stock
The Swift™ 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider® makes this headlight USB rechargeable for convenient on-the-go charging. The Swift™ 300 features a highly durable light housing with Dupont® Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance.
Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more.
SWIFT™ 300 FRONT LIGHT FEATURES • Lumen Output: 300 • 5 Modes with Run Times: 2:00 – 28:00h • Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA • Water / Dust Resistant IP64 Rated • USB Rechargeable
SWIFT™ 300 TYPICAL RUN TIMES Low - 15:00h at 80 Lumens Med - 9:00h at 150 Lumens High - 2:00h at 300 Lumens Flash - 12:00h at 300 Lumens Walk - 28:00h at 20 Lumens
Vmax+™ 150 TAILLIGHT FEATURES • Lumen Output: 150 • 6 Modes with Run Times: 5:30-27:30h • Charge Time: 2:00h • Water / Dust Resistant IP64 Rated • USB-C Rechargeable
Vmax+™ 150 TYPICAL RUN TIMES Fast Flash - 12:45h Slow Flash - 10:15h Disco Flash - 10:45h Pulse Flash - 7:00h High Steady - 5:00h Low Steady - 27:00h
Epro™ 1000 and Emax+™ 150 Combo
19 in stock
Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).
Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).
EPRO™ 1000 FEATURES •Lumen Output: 1000 • 2 Modes • Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts •Water / Dust Resistant IP64 Rated • Weight: 166 grams • Fits 22mm-31.8mm seat posts • Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims
LIGHT MODES 1) Steady ON 2) Pulse Flash
Emax+™ 150 FEATURES • Lumen Output: 150 • 6 Modes • Hardwired, Voltage 6 to 80 Volts DC • Water / Dust Resistant IP64 Rated • Weight: 75 grams • Fits 22mm-34.9mm seat posts • Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount
Emax+™ 150 LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady
NiteRider® recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Epro™ 1000 Headlight not compatible with 6 Volt systems.
You live and ride in the city. Busy roads full of fast moving traffic, the risk of an accident is always there, day and night. Let NiteRider illuminate the concrete jungle with our highly attainable bike lights, suitable for road, light MTB trails, commuting and leisure cycling.
Sign up for NiteRider News!!!
While we have you here, sign up to receive email updates for new product releases and contests. Also a chance at FREE GIVEAWAYS-we're rooting for you!