Oct24 HP - PRO SeriesBike Lights

Engineered with custom optics, the reflector helps project 1400 lumens from a single high-powered LED. 
Destined to be the gold standard in versatility, the Pro 1400 Race is equally at home on your helmet or on your handlebars. Off-road and road riders alike will appreciate its small size and weight which come at no sacrifice to durability and performance.

MORE BELOW ↓

FEATURES
•  Lumen Output: 1400
•  7 Modes with Run Times: 2:00 – 32:45hrs
•  Charge Time: 5:00hrs
•  Weight: 484g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Single High Performance LED
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 9:30h at 400 Lumens
Medium - 3:45h at 850 Lumens
High - 2:00h at 1400 Lumens
Flash - 32:45h
Beacon - 32:45h
S.O.S. - 32:45h
Walk - 32:45h at 125 Lumens

*Run times are approximations and may vary

INCLUDES
• LED Headlamp
• 4 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 1400 Race User Guide Spec Sheet

Featuring a custom engineered 'triple-cone' reflector housing 3 high-performance LEDs. The Pro 1800 Race outputs 1800 lumens, you’ll be sure to see every trail line, root, rut or rock with relative ease. If features an accurate eight step fuel gauge, keeping the rider informed of the 4-cell battery levels at all times.

MORE BELOW ↓

FEATURES
•  Lumen Output: 1800
•  7 Modes with Run Times: 1:30 – 25:00hrs
•  Charge Time: 5:00hrs
•  Weight: 484g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Triple-cone reflector w/ 3 LEDs
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 400 Lumens
Medium - 3:00h at 700 Lumens
High - 1:30h at 1800 Lumens
Flash - 25:00h
Beacon - 25:00h
S.O.S. - 25:00h
Walk - 25:00h at 80 Lumens

*Run times are approximations and may vary

INCLUDES
• 3-LED Headlamp
• 4 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 1800 Race User Guide

With a 3600 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. But sometimes you don’t need max light output and you need to save your 8 Cell Li-ion battery’s life for more technical terrain, in which case NiteRider® has you covered with an ergonomically friendly remote switch allowing you to cycle through the flash and four steady light modes.

MORE BELOW ↓

FEATURES
• Lumen Output: 3600
• 7 Modes with Run Times: 1:30 – 21:00hrs
• Charge Time: 5:00hrs
• Weight: 839g
• Battery: Li-Ion
• 8-step Fuel Gauge
• Remote Switch, easy thumb operation
• Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 1800 Lumens
High - 1:30h at 3600 Lumens
Flash - 15:00h
Pulse - 11:00h
S.O.S. - 21:0h 
Race - 16:30h at 450 Lumens

*Run times are approximations and may vary

With a 2200 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon.

FEATURES
•  Lumen Output: 2200
•  7 Modes with Run Times: 1:30 – 25:00hrs
•  Charge Time: 5:00hrs
•  Weight: 484g
•  Battery: Li-Ion
• 8 Step Fuel Gauge
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES
Low - 6:00h at 500 Lumens
Medium - 3:00h at 800 Lumens
High - 1:30h at 2200 Lumens
Flash - 25:00h at 730 Lumens
Beacon - 25:00h at 730 Lumens
S.O.S. - 25:00h at 730 Lumens 
Race - 25:00h at 250 Lumens

*Run times are approximations and may vary

View / Download Pro 2200 Race User Guide Spec Sheet 

With a 2200 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon.

MORE BELOW ↓

FEATURES
•  Lumen Output: 2200
•  7 Modes with Run Times: 3:00 – 50:00hrs
•  Charge Time: 5:00hrs
•  Weight: 702g
•  Battery: Li-Ion
•  8 Step Fuel Gauge
•  Handlebar and Helmet Mountable
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 12:00h at 500 Lumens
Medium - 6:00h at 800 Lumens
High - 3:00h at 2200 Lumens
Flash - 50:00h at 730 Lumens
Beacon - 50:00h at 730 Lumens
S.O.S. - 50:00h at 730 Lumens 
Race - 50:00h at 250 Lumens

*Run times are approximations and may vary

INCLUDES
• 3-LED Headlamp
• 8 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

View / Download Pro 2200 Enduro User Guide Spec Sheet 

With a 4200 lumen output, you’ll be sure to see every trail line, root, rut or rock with relative ease. But sometimes you don’t need max light output and you need to save your 8 Cell Li-ion battery’s life for more technical terrain, in which case NiteRider® has you covered with an ergonomically friendly remote switch allowing you to cycle through the four steady light modes, two steady flashes and S.O.S.

FEATURES
• Lumen Output: 4200
• 7 Modes with Run Times: 1:30 – 21:00hrs
• Charge Time: 5:00hrs
• Weight: 839g
• Battery: Li-Ion
• 8-step Fuel Gauge
• Remote Switch, easy thumb operation
• Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 2000 Lumens
High - 1:30h at 4200 Lumens
Flash - 15:00h at 1400 Lumens
Pulse - 11:00h at 1400 Lumens
S.O.S. - 21:0h at 1400 Lumens
Race - 16:30h at 600 Lumens

*Run times are approximations and may vary

View / Download Pro 4200 Enduro Remote User Guide Spec Sheet 

The Pro 2200 MX Race Helmet Headlamp is equipped with 3 high quality LEDs and comes with Jawbone MX Mount for Pro Series. The quickly and securely attaches to full face helmets allowing you see farther into a turn, giving you more confidence through tight dark turns.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 2200
Run Time: 1:30 – 25:00hrs
Charge Time: 5:00hrs
Battery: 4 Cell Li-Ion
1 Meter Impact Test: Pass/OK

WEIGHT
Head light +Jawbone mount = 221 Grams
221 Grams + battery pack = 556 Grams

RUN TIMES*
Low - 6:00h at 500 Lumens
Medium - 3:00h at 800 Lumens
High - 1:30h at 2200 Lumens
Flash - 25:00h at 730 Lumens
Beacon - 25:00h at 730 Lumens
S.O.S. - 25:00h at 730 Lumens 
Race - 25:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP64 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 4 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Solid Mounting with our Jawbone MX Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 4 Cell Li-Ion Battery
• Jawbone MX Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

The Pro 2200 MX Enduro (8 Cell) Helmet Headlamp is equipped with 3 high quality LEDs and comes with Jawbone MX Mount for Pro Series. The quickly and securely attaches to full face helmets allowing you see farther into a turn, giving you more confidence through tight dark turns.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 2200
Run Time: 3:00 – 50:00hrs
Charge Time: 5:00hrs
Battery: 8 Cell Li-Ion
1 Meter Impact Test: Pass/OK

WEIGHT
Head light +Jawbone mount = 221 Grams

RUN TIMES*
Low - 12:00h at 500 Lumens
Medium - 6:00h at 800 Lumens
High - 3:00h at 2200 Lumens
Flash - 50:00h at 730 Lumens
Beacon - 50:00h at 730 Lumens
S.O.S. - 50:00h at 730 Lumens 
Race - 50:00h at 250 Lumens

*Run times are approximations and may vary

FEATURES
• IP64 Rating – Dust-proof and water resistant
• Uses 3 LEDs, the highest performing LEDs on the market
• Rugged design, specifically for off road conditions
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Includes a high performing 8 Cell Li-Ion Battery Pack
• 8-Step Battery Fuel Gauge to easily monitor remaining power level
• Solid Mounting with our Jawbone MX Mount for Pro Series
• Multiple light mode levels, including a safety Daylight Flash
• Hand assembled in our San Diego, CA facility
• Custom Reflectors designed for off-road riding

SYSTEM INCLUDES
• Pro 2200 MX Headlamp
• 8 Cell Li-Ion Battery
• Jawbone MX Mount for Pro Series
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

INCLUDES
• 3-LED Headlamp
• 8 Cell Li-Ion Battery
• Helmet Mount
• Handlebar Mount – Fits up to 35mm
• 36” Extension Cable
• AC Adapter
• Nylon Storage Pouch

Ideal for Off Road applications, the Pro 4200 MX Enduro Helmet Headlamp is equipped with 6 high quality LEDs and comes with Jawbone MX Mount for Pro Series. Our proprietary mount attaches securely to full face helmets allowing you to see that trench, maintain your corner speed, rip through that corner, and flow through your line! Increase your visibility and enhance your riding experience by seeing farther and wider, delivering light to areas that your headlights don’t.

SPECIFICATIONS BY FL1 STANDARDS
Lumen Output: 4200
Run Time: 1:30 – 21:00hrs
Charge Time: 3:00 / 6:00hrs
Battery: 8-cell Li-Ion Battery with USB output capability

WEIGHT
Head light + stick-on pivot mount = 160 Grams

RUN TIMES*
Low - 6:00h at 1000 Lumens
Medium - 3:30h at 2000 Lumens
High - 1:30h at 4200 Lumens
Flash - 15:00h at 1400 Lumens
Pulse - 11:00h at 1400 Lumens
S.O.S. - 21:0h at 1400 Lumens
Race - 16:30h at 600 Lumens

*Run times are approximations and may vary

FEATURES
• IP64 Rating – Dust-proof and water resistant
• Uses a total of 6 LEDs, the highest performing LEDs on the market
• Dual Custom Reflectors – delivers beam patterns designed for off-road riding
• Borofloat® Lens – high quality glass lens
• 8 Cell Li-Ion Battery Pack with USB output to charge other USB devices
• Solid Mounting with NiteRider® Jawbone MX Mount for Pro Series
• Hand assembled in our San Diego, CA facility

SYSTEM INCLUDES
• Pro 4200 MX Enduro Headlamp (Helmet not included)
• 8-cell Li-Ion Battery with USB output capability
• Jawbone MX Mount for Pro Series
• 36” Extension Cable
• AC Adapter AND MX Hardwire Kit
• Nylon Storage Pouch

DESCRIPTION
Replacement 4-cell battery for all NiteRider Pro Series lighting systems

SYSTEM COMPATIBILITY
All Pro Series systems

CHARGING
This battery is only compatible with our Enduro battery charger. If you don’t have one, you can purchase it here on our website here.
Using a NiMH or charger for other battery types will damage the Li-Ion battery

DESCRIPTION
Replacement battery for all NiteRider Pro Series bicycle lighting systems

SYSTEM COMPATIBILITY
All Pro Series systems

CHARGING
This battery is only compatible with our Enduro battery charger. If you don’t have one, you can purchase it here on our website here.
Using a NiMH or charger for other battery types will damage the Li-Ion battery

SYSTEM COMPATIBILITY
All Pro Series systems

CHARGING
This battery is only compatible with our Enduro battery charger. If you don’t have one, you can purchase it here on our website here.
Using a NiMH or charger for other battery types will damage the Li-Ion battery