Gear Guide E-Bike Lights

Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).

FEATURES
• Lumen Output: 1000
• 2 Modes
• Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts
• Water / Dust Resistant IP64 Rated
• Weight: 166 grams
• Fits 22mm-31.8mm handlebars
• Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims

LIGHT MODES
1) Steady ON 
2) Pulse Flash 

NiteRider® recommends this headlight be installed by an authorized e-bike service and repair shop.
Please reference your bike manufacturers manual for compatibility.
Not compatible with 6 Volt systems.

 Click to View / Download Epro™ 1000 User Guide

Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).

FEATURES
• Lumen Output: 150
• 6 Modes
• Hardwired, Voltage 6 to 80 Volts DC
• Water / Dust Resistant IP64 Rated
• Weight: 75 grams
• Fits 22mm-34.9mm seat posts
• Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount

LIGHT MODES
1) Fast Flash 
2) Slow Flash 
3) Disco Flash 
4) Pulse Flash 
5) High Steady 
6) Low Steady

NiteRider® recommends this taillight be installed by an authorized e-bike service and repair shop.

 Click to View / Download Emax+™ 150 User Guide

Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).

Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).

EPRO™ 1000 FEATURES
• Lumen Output: 1000
• 2 Modes
• Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts
• Water / Dust Resistant IP64 Rated
• Weight: 166 grams
• Fits 22mm-31.8mm seat posts
• Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims

LIGHT MODES
1) Steady ON 
2) Pulse Flash 

Emax+™ 150 FEATURES
• Lumen Output: 150
• 6 Modes
• Hardwired, Voltage 6 to 80 Volts DC
• Water / Dust Resistant IP64 Rated
• Weight: 75 grams
• Fits 22mm-34.9mm seat posts
• Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount

Emax+™ 150 LIGHT MODES
1) Fast Flash
2) Slow Flash
3) Disco Flash
4) Pulse Flash
5) High Steady
6) Low Steady

NiteRider® recommends this headlight be installed by an authorized e-bike service and repair shop.
Please reference your bike manufacturers manual for compatibility.
Epro™ 1000 Headlight not compatible with 6 Volt systems.

 Click to View / Download Epro™ 1000 / Emax+™ 150 Combo User Guide